Sunflower Oil Machine, Sunflower Production Line, Edible Oil Extraction Machine
Applicable Raw Materials
Process Flow Description
Pretreatment and pre-pressing section
Main equipment introduction
Metering and cleaning
The purpose of metering is to control the output of the workshop. Cleaning is very important to the pretreatment process. Impurities in the oil can lead to shortened equipment life and reduced production efficiency. What's more, clogging with dust and other impurities greatly increases the risk of fire. Therefore, it is required to use a cleaning sieve to remove large impurities, use a magnetic separator to remove metal impurities, and use a suction device to absorb the accompanying dust.
Toothed Roll Sheller
The characteristics of Huatai's professional research and development of toothed roller shelling machine: compact structure, wide application range, good shelling rate and crushing effect, small powder degree, low power consumption, convenient operation and maintenance, long service life, it is the replacement product of shelling machine .
Kernel shell separation
The plane rotary screen is used to make the material pass through the screen quickly through a specific reciprocating rotary motion mode and a low inclination screen surface, so as to achieve high screening efficiency and high output. And equipped with automatic tension and automatic cleaning screen installation system, to achieve the user's ideal screening effect. The fully enclosed structure meets the environmental protection requirements of the working environment;
Flaking
The oil material is pressed into thin sheets with a thickness of about 0.45-0.55 mm by using a hydraulic flaking machine with two rollers. During the embryo pressing process, the oil seeds release the oil wrapped in the cells under the action of squeezing and rubbing, so that the oil can be easily removed during pressing. But it is not that the thinner the blank is, the better. If it is too thin, the powder of the blank will increase, and the slag content in the oil for the oil press will be high.
Steaming and Frying Pan
The vertical steaming and frying pan is mainly used for steaming and frying, which is composed of several layers of single pots. There is a vertical axis in the center of the steaming and frying pan passing through each layer, and two paddle-type stirring fins are fixed on the vertical axis in each layer of the pot body to stir the material layer. The height of the material layer of each layer of the pot body is controlled by controlling the amount of material blanking. At the same time, there are exhaust pipes on the side walls of each layer of the pot body, which are jointly connected to the exhaust main pipe to discharge the water vapor evaporated during the steaming and frying process.
Oil Pressing
The oil press adopts the special low-temperature screw oil press developed by Huatai Company. The screw oil press has the advantages of large continuous processing capacity, short dynamic pressing time, high oil yield, adjustable cake thickness, and convenient maintenance. , The hydraulic oil can be cooled by water and air, the cake outlet has no peculiar smell, the whole machine is closed, energy saving, beautiful, and small footprint;
Oil Residue Filtration
The vertical blade filter is mainly composed of tank body, filter blade, support rod, oil collecting pipe, slag discharge butterfly valve, vibrator, jack and tank cover top locking device. It has the characteristics of small size, high efficiency, fully enclosed operation, automatic slag discharge, and continuous operation.
Technology advantage.
- Some fans use frequency conversion to reduce power consumption.
- Less conveying equipment, less lifts and augers. Understands the failure rate in normal production.
- High degree of automatic control
- The dust removal system is designed reasonably, and the exhaust exhaust meets the national environmental protection requirements;
Huatai fully automatic pretreatment equipment can process output:
- 30-5000 t/d Soybean, Rapeseed, Sunflower, Cottonseed, Peanut Pretreatment
Complete Project
- 30-1000 t/d Rice bran, Flaxseed Pretreatment
Complete Project
- 30-500 t/d Tea seed, Sesame, Safflower seed Pretreatment
Complete Project
Overseas Project Display
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}