| Customization: | Available |
|---|---|
| After-sales Service: | Installation Guidance and After-Sales |
| Warranty: | Key Parts 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Oil extraction machine
Extractor type: Rotocel extractor, loop extractor, chain extractor.
Specification: 20-5000T/D
Suitable materials: Flakes,expanded materials or pressing cake from prepressing plant.
1.Working principle:
Oil extraction process is a kind of making oil method utilizing the character that oil in oilseeds dissolves in selected solvent and diffuse together.It is a mass transfer process,also used in chemical operation.Evaporate and strip mixture of oil and solvent according to different boiling points between volatile solvent and non-volatile oil, make solvent vaporization into gas and separate from oil to get crude extracted oil.Solvent can be recycled after condensation.There is some solvent in meal,it needs drying to recover and get dry meal.
2. Extraction Process
Soybean flakes, expanded rice bran pellets or pressing cake from prepressing plant is conveyed to extractor through feed hopper with material level controller,and moves into curved section together with chain, spray it with miscella with diminishing concentration in moving process, miscella falls down into miscella collection hopper through the gap of grid tray, then pump it out and spray pressing cake again and fall down into the second miscella collection hopper,pump the miscella out into cyclone hydraulic separator through concentrated miscella pump to remove powder impurities and then enters evaporation system. Before materials enter draining section, spray it with fresh solvent again,drained wet meal discharges from the outlet of meal and enters wet met scraper conveyor.
2.1There are twice reversal in the whole extraction process,it's beneficial for the uniformity of solvent and miscella to material layer; low material layer extraction is beneficial for quick permeation and draining of solvent and miscella,shorten extraction time;reduce residual solvent rate and residual oil rate in meal, loop extractor is dismountable, convenient for transportation;feeding material and discharging meal are uniform and continuous, beneficial for pressure stabilization of the whole system,with advantages of low power consumption, stable operation, no noise, low maintenance cost.
2.2 Feeding system has material level controller according to feeding capacity, make feed hopper keep certain material level all the time,beneficial for forming micro negative pressure in extractor, reduce solvent leakage.
2.3 Advanced miscella circulation theory design is beneficial for reducing input of fresh solvent, reducing residual oil in meal, improving miscella concentration, achieve energy-saving purpose through reducing evaporation capacity.
2.4 Especially suitable for all kinds of prepressing cake extraction.
3. Desolventizing-toasting Process
Wet meal with solvent out from extractor is conveyed to preliminary desolventizing layer of DTDC,integrating desolventizer,toaster,dryer and cooler, with wet meal scraper conveyor via airlock, the bottom uses indirect steam to heat, remove part of solvent; wet meal after preliminary desolventizing enters toasting layer,which sets automatic control to keep certain material layer, steam from the bottom to remove all solvent, at the same time, part of steam congeals in meal,the moisture of meal will increase partly. Desolventized meal material level is controlled by each layer, drying layer keeps certain material level, to dehydration and drying process.Finally control discharging materials with automatic material door, then use meal scraper conveyor to convey meal into meal warehouse.
Mixed vapor of solvent out from the top of desolventizer-toaster and water vapor, goes through solvent catcher ,then enters condenser for cooling recovery.
3.1 Unique breathable pan design,beneficial for good contact between materials and steam,with good desolventizing effect,small direct steam consumption,low outlet temperature of twice steam.
3.2 Preliminary desolventizing layer and permeable layer adopt horn mouth discharging materials, with good sealing, uniform discharging materials, stable material layer, adopt automatic material door discharging controlled by this layer.
3.3 Meal quality is stable,urease activity reaches national standard,color is light yellow and uniform,no clustering phenomenon,moisture is adjustable,temperature is a little higher than room temperature;
4. Evaporation Process
Miscella enters the first long tube evaporator tube pass from miscella tank, evaporated solvent enters evaporation condenser through separation chamber,outlet pipelines of separation chamber set liquid level control device to keep liquid seal. Miscella enters disc of tower from the top of steam-stripping tower,fall layer by layer,at the same time inject direct steam from the bottom,remove residual solvent.Top outlet connects evaporation condenser, use high vacuum injection pump to keep steam-stripping tower work under negative pressure,equipped with liquid level controller on the bottom of steam-stripping tower to ensure liquid level and stable flow of finished oil,crude oil is drawn from tower bottom with steam-stripping drawn pump to cool and then enters crude oil tank.
4.1 Evaporation temperature is low, residual solvent in crude oil is low, color is light,no phospholipids precipitation,evaporator and steam-stripping tower scaling not easy;
4.2The advantages of using long tube condenser is high solvent recovery rate,reducing condenser area and saving investment cost.
4.3 Using boiling tank makes solvent in drained waste water reach the minimum value.
5. Solvent condensation and water separation process
Condensate from extraction condenser,desolventizing condenser, evaporation condenser and steam stripping condenser gathers and recycle through condensate into water separation tank.Free gas in solvent warehouse gathers and enters final condenser, uncoagulate gas out from final condenser enters new type energy-saving water bath exhaust gas recovery device. Solvent in water separator flows into solvent warehouse for recycling, water is drained into boiling tank, steam from the bottom of boiling tank to evaporate residual solvent then drain to water seal tank.
1. Strenth Factory, speciallized in grains & oils for over 60 years
2. Research and Development Center
3. Strict quality control system
4. Dozens of certificates and honors
5. Rich experience of large overseas projects
6. Thoughtful & Considerate after-sale Service
Q:Are you a trading company or a factory.
A: We are not just a trading company, we are a real factory with export license, and have speciallized in Grain and Oils machine for over 60 years.
Q:What's your main Product series?
A: We produce Oilseeds Pretreatment, Oil Extraction, Oil Refinery Equipment, Milling Machine and other related Grain and oil processing equipment.
Q:What kind of oilseeds can your equipments process?
A: Based on our strength R&D support, we can handle all kinds of the oilseeds, Palm fruit, Coconut, Soybean, Rapeseed, Cotton Seed, Sunflower seed, Peanut, Corn germ, Rice Bran, Sesame, Walnut etc.
Q:Do you have the small oil press machine?
A: Yes, we have small oil press machine, AKA home use oil press machine, single oil extraction machine.
Q:Can you provide Turnkey Service Oversea?
A: Yes, we have rich experience in large EPC turnkey service, and we can provide EPC Turnkey Service Overseas.
Q: Who are you selling to? Where are your main market?
A: We have already sold our products in over 1 hundred contries all over the world. Our main markets include India, Malaysia, Thailand, Vietnam, Indonesia, German, Brazil, German, Poland, Iran, India, Dubai, Dominican, Cuba, South Africa etc.
Q: How about the Delivery time, payment terms?
A: Accordding to the requirement of different customers, we will provide the most suitable solution for you.
Q: Where your factorY location? How could I come to visit your factory?
A: Our Overseas Business Dept. locate in Zhengzhou City, so you can fly to Xinzheng International Airport, then we'll pick you up.
Our Services
1. Supply set of equipment and accessories on time.
2. Ensure the installation and debugging are succeed by one time.
3. Supply good material and price machine to customer.
4. Develop new product and production technology and supply them to customer
5. We will direct the installation and operation of the equipment, and train operators for customer
6. Engineers available to service machinery overseas
7. 1 year warranty period for machine, during this period we will amend the machine free charge if
it is equipment quality problem. But if the machine broken by operation reason, the customer need to take the accessories charge. We will supply solution within 4 hours, or our engineer comes to solve it within 3 working days.
){kind=link}