Huatai Automatic New Design Sunflower Oil Dewaxing Equipment for Sale

Product Details
Customization: Available
Type: Oil Mill
Application: Oil
Manufacturer/Factory & Trading Company
Diamond Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Customization from Designs
The supplier provides design based customization services
QA/QC Inspectors
The supplier has 6 QA and QC inspection staff
100% Finished Products Inspection
The supplier inspects 100% of finished products.
R&D Capabilities
The supplier has 25 R&D engineers, you can check the Audit Report for more information
to see all verified strength labels (16)
  • Huatai Automatic New Design Sunflower Oil Dewaxing Equipment for Sale
  • Huatai Automatic New Design Sunflower Oil Dewaxing Equipment for Sale
  • Huatai Automatic New Design Sunflower Oil Dewaxing Equipment for Sale
  • Huatai Automatic New Design Sunflower Oil Dewaxing Equipment for Sale
  • Huatai Automatic New Design Sunflower Oil Dewaxing Equipment for Sale
  • Huatai Automatic New Design Sunflower Oil Dewaxing Equipment for Sale
Find Similar Products

Basic Info.

Voltage
380V
Appearance
Horizontal
Press Materials
Oil Seed
Press Series
Second
Condition
New
Customized
Customized
Material
Customers′ Request
Function
Making Edible Oil
Advantage
High Oil Yield
Warranty
12 Months
Transport Package
Container
Specification
full
Trademark
Huatai
Origin
China

Product Description

 

Soybean is a very common raw material for oil extraction. Its oil content is in the range of 15.6%-22.5% and contains 35%-45% of protein, It makes soybean a high-quality high-protein and high cost performance oil material.

 

 

 

In the programme of Huatai, Soybean oil extracting mainly includes three sections:

 

  • Soybean pre-treatment and pre-pressing
  • Soybean oil extraction
  • Soybean oil refining

 

Realated craft flow and equipments is as following:

 

1. Material Pre-treatment

 

In this section, the impurities in the soybean material will be removed and the soybean hulls will be separated. The bean embryo will be broken into small pieces and then processed into a puffed state. The purpose for this arrangement is to create a good production enviroment and minimize the total fat loss, increase oil yield and output and improve the quality of oil and cake & meal.

 

 

  

 

 

 


2. Oil Extraction

 

After sealed screw conveyor put the puffed soybean into exactor, the oil in extruded soybean will be dissolved by solvent, finally get crude oil. Compared with the pressing method, the residual rate of leaching is low (<1%) and offer a better quality meal. At the same time, this solution has the following features:

  1. Adopting negative pressure evaporation can ensure excellent oil quality;
  2. Extraction system is highly adaptable, and can adapt to different raw material ;
  3. All equipments are provided with exhaust gas absorption systems with excellent absorption effect;
  4. Full energy-saving design utilizes heat energy for many times and saves steam consumption.

 

 

 

 

 

 


3. Oil Refinery
 

Crude oil contains a large number of other ingredients that require further refining. In this section, continuous alkali refining shortens contact tome between oil and lye,which reduces oil saponification state,lowers refining consumption,and improves efficiency;negative pressure state avoids oxygen in the air from contacting with hot oil,thereby ensuring oil product quality ,inhibiting with hot oil,there by ensuring oil product quality,inhibiting acid value to rise again,and lowering peroxide value; physical refining section adopts new type continuous deacidiffication and deodorization craft, the actual production proves its most obvious advantages as following: strong deacidiffication ability ,excellent hot bleaching effect,high refining rate ,good oil quality etc.

 

 

 

 

 

  

 

 

Huatai Automatic New Design Sunflower Oil Dewaxing Equipment for Sale

Brief Introduction of Huatai Company:

Henan Huatai Cereals & Oils Machinery Co., Ltd. (short for HHFOME) is located in the Industry cluster of Huaxian, Henan Province which covering 100,000.00 square meters and have more than 580 staffs. We are a large scale grain and oil equipments production enterprise which specialized in researching, designing, manufacturing, installation. Since now we have got 22 items national patents, 6 international prizes, etc. Our equipments have been got ISO9001, SGS, CE, IAF and CNAS certifications. Also we have been exported to Bolivia, Sudan, Kazakhstan, Russia, Tajikistan, Malaysia, Indonesia, Bangladesh, Vietnam, Thailand, Burma, etc. All of our members will try our best to help you build a powerful and most suitable plant to save your costs and get max benefits.

 

 

The common sunflower oil production line includes three workshops:

 

(There are also other different production craft, our engineers can design the plant according to your requests)

 

1. Sunflower Seeds Pretreatment and Prepressing Workshop

 

2. Sunflower Cake Solvent Extraction Workshop

 

3. Crude Sunflower Oil Refining Workshop

 

 

 

Section 1:  Soybean Seeds Pretreatment and Prepressing Workshop
---Flow Chart:

                                                       Impurities

                                                                                                       

Sunflower Seed→Cleaning and Stone Removing Magnetic Separation→
Crushing →Flaking →Cooking→Prepressing →Crude Oil Filtration→Pressed Crude Oil

                                                                           ↓

                                                    Sunflower Cake →Cake warehouse

Note: According to customers' requests, also can add sunflower seeds dehulling process.

 

---Quality Index of Sunflower Seeds:
Smell,colur:Normal
Water content:≤13%
Impurity content:≤1.5%
Oil content:18~22%

 

---Index of Main Consumption
(Different capacity has different consumption, for example of 150TPD sunflower seeds pretreatment and pressing workshop)
Electricity consumption:≤26.64kwh/t 
Steam consumption: ≤480kwh/t

 

---Quality Index of Crude Pressed Sunflower Oil:

Item

Quality index

Smell & Taste

Sunflower oil inherent original smell and taste, no desirable odor

Moisture&Volatiles (%)

0.2

Insoluble Impurities (%)

0.2

Acid Value(KOH) (mg/g)

4.0

Peroxide Value(mmol/kg)

7.5

Residue Solvent(mg/kg)

100

 

---Process Description:

1). Magnetic separation

The cylinder magnetic separator consists of shell, rotating door, magnetic core, etc. The magnetic core consists of distributing umbrella shape hat, magnetic ring, magnetic core cylinder. The raw materials get into the machine through the upper flange inlet, then through the distributing umbrella shape hat to make the materials fall down averagely, if there are iron materials inside the sunflower, the iron materials will be absorbed by the magnetic ring, to separate with sunflower. 
The cylinder magnetic separator has the advantages of no power, saving energy, easy maintenance and usage, etc. ( Sunflower Oil Dewaxing Equipment )

2). Cleaning 
Cleaning process is very important for pretreatment process. The bigger materials maybe will wedge into the equipments to block the raw materials, this will corrupt the equipments which will shorten the using life and lower down the working efficiency. Therefore, it needs cleaning screen to remove the big impurities, using magnetic separator to remove the metal things.


The cleaning sieve always use vibrating sieve, it means the screen is taking advance and return movement in the working time, the cleaning efficiency is very high and works reliable. The structure consists of feeding parts, screen body, screen surface, screen cleaning parts, vibrating parts, drying parts, dust catching parts, etc.

3). Specific-gravity Stoner 
This machine is used to separate the side by side stone from the sunflower seed, according to the different specific gravity and suspending speed, the side by side stone will fall at bottom, and under the function of stoning plates, the stone moves to the stone discharging port. While the soybean seed at the upper floor will flow to the soybean discharging port under the self-supporting effect. The machine has the features of strict structure, good dustpoof effect, and high stoning ratio, etc. 

 

 

4). Crushing 
The purpose of crushing is to crush the soybean seed into small granules, which will be easy for flaking process to destroy the oils and fats cells, which can provides conditions for high oil pressing efficiency. Assembled with alloy tooth roller which using life is one time longer than common rollers. The crusher can crush the corn germ averagely, also it has automatic roller control system, also it has good sealing effect. ( Sunflower Oil Dewaxing Equipment )

5). Conditioning
Adopts layer type conditioning pot, the max distance between mixing wing and bottom of pot is 5mm for each layer, which avoid the nonuniform of raw materials. The whole pot is wholly sealed to keep the max humidity of the space of raw materials, to reach the best flaking effect and reduce the powder degree.

 

6). Flaking 
The purpose of flaking is to destroy the corn germ's cell tissue which can make the oil separated smoothly. Also the flaking machine assembles alloy roller which using life is 1 time longer than common roller and also assembles automatic hydraulic roller tightening system to ensure the average thickness of flakes(≤0.3mm), the whole machine is sealed well.

 

7). Prepressing 
Since sunflower seeds are a kind of high oil content oilseeds, so we usually adopts prepressing first then solvent extraction method to get the oil out maximumlly. The prepressing methos can get 70% oil out, the oil residue in cake is about 15-20%. Adopts the prepressing process can meets different customer's needs about pressed sunflower oil and extraction sunflower oil, also the low fat meal.


---Technical Highlight

1). All the driving equipment adopts oil equipments special configuration, which has long using life and reliable working.
2). Higher mechanization and serialization, which can reduce labour working to reduce the labor cost.
3). More advanced dust removal system to ensure the tidy and clean of workshop, meanwhile reduce the discharge of powder. ( Sunflower Oil Dewaxing Equipment )

 

 

Secontion 2:  Sunflower Cake Solvent Extraction Workshop

---Flow Chart:

                                       Evaporation and Steam Stripping

                                         ↑

        Soybean  Flakes→Oil extraction→Mixed oil processing→Crude oil

  ↓

      Solvent collection←Wet cake desolventizing→Finished cake

 

 

---Quality Index of Finished Products:

Oil residue of sunflower meal: ≤ 1.0% 
Moisture of meal: 12% (adjustable)
Solvent residue of sunflower meal: ≤ 500PPM
Total volatiles matter of crude oil: ≤ 0.2%
Residual solvent of crude oil: ≤ 100PPM

 

---Main Consumption Index:
(Different capacity has different consumption, for example of 80TPD sunflower cake extraction workshop)
Electricity: ≤12KWH/t 
Steam: ≤350 Kg/t (environment temperature:20ºC,1Mpa saturated vapor)
Solvent: ≤3.0KG/t (vegetable oil extraction solvent(GB 16629-2008))


---Process Description:
1). Solvent Extraction Procedure
The sunflower meal gets into the extractor through feeding scraper, the materials run a circle from the feed inlet to discharge outlet in the extractor. Spraying the extruded rice bran with the concentrate diminishing miscella between the feed inlet to discharge outlet. Then before getting into the drain off section, spraying again with fresh solvent, the drained wet meal discharges into the wet meal scraper from the extractor's discharge grid through kick-out device. The concentrated miscella gets into the two-stage hydrocyclone from the pump, to remove the powder impurities, finally get into the miscella tank. 
2). Desolventizing Procedure of Sunflower Oil Dewaxing Equipment: 
The solvent contain wet meal that from the extractor are sent to the DTDC desolventizer's pre-desolventizing layer by scraper through air locker, the bottom is heated by indirect steam to remove part of solvent; then the pre-desolventized wet meal get into the desolventizing layer, there are automatic control on the desolventizing layer to keep certain thickness of materials, then the bottom gets into the direct steam to remove all the solvent, at same time some steam condense in the meal, the moisture content of meal will sectional rise. 

 

The desolventized meal falls onto the drying layer quantitative through rotary valve, the drying layer keeps certain materials level, then process the drying procedure, after drying get into the cooling layer to lower down the temperature, finally discharge the finished meal through automatic flow controlling gate, then though the scraper to transport the meal to warehouse. 

 

 

3). Evaporation Procedure
The miscella gets into the first long tube evaporation pass from the miscella tank, the evaporated solvent gets into the evaporation condenser through separation chamber, there are liquid level controlling device on the separation chamber's outlet pipeline to keep the liquid seal, the miscella that after first evaporation concentration gets into the second long tube evaporator for evaporating process. The shell pas is heated by indirect steam, the evaporated solvent vapor gets into evaporation condenser through separation chamber, there are liquid level controlling device on the separation chamber's outlet pipeline to keep the liquid seal. The miscella gets into the stripping tower's disks from the top of the tower, then fall down layer by layer, meanwhile jet direct steam from the bottom of tower to remove the residue solvent. 

 

The top exit connects evaporation condenser, the high vacuum jet pump keep the stripping tower working at negative pressure condition, also there are liquid level controlling device in the bottom of stripping tower to keep the liquid seal and steady flow quantity of product oil, the crude oil are extracted out from the bottom of tower through extraction pump, after cooling then get into crude oil.

 

 

4). Solvent Condensation and Water Separation Procedure of Sunflower Oil Dewaxing Equipment:
The liquor condensate that from evaporation condenser, energy saver condenser and steam stripping condenser is collected together then through recovery pump to inject them into water segregator. The end condensed steam enter into the energy saver condenser, the energy saver's liquor condensate and first evaporation shell pass's liquor condensate get into the water segregator directly. The free gas of energy saver condenser,tripping condenser, water segregator and solvent library together enter into the final condenser, the end steam from final condenser is absorbed by paraffin recovery device. 


The solvent phase of water segregator flows into solvent library for partial recycling, the water phase discharged into steam tank, the direct steam gets into the steam tank from the bottom to evaporate residue solvent, after this the water phase discharged into water seal tank.

 

4). Tail Gas Absorption Procedure 
The non condensed vapor from extraction evaporator, DT evaporator, oil stripper, cooking pot, water segregator and underground solvent tank, get into the final condenser for recovering the solvent, the non condensed vapor from the final condenser gets into the mineral oil recovery device, the free gas are discharged into air through fire barrier. 


---Technology Highlights:

---Adopting micro negative pressure process, save steam and reduce energy consumption. 
---The secondary steam in the condensed water tank can be used for waste water preheating, reduce the steam consumption.

---Mixed oil adopts two levels process in removing impurity, dense mixed oil firstly into primary rotary liquid separator to remove larger particles, and then enter the secondary rotary liquid separator to remove impurity. After rotating liquid separation, the mixed oil nearly without solid impurities. After separation, the cleanermixed oil into the mixture oil staging tank for further precipitation, the bottom sediment of the mixing tank back into the extractor regularly by slag pump. Two process filter of the mixed oil and the use of negative pressure evaporation process, greatly reduce fouling in evaporation system, and evaporation system cleaning cycle can be extended. 
---Collection all the steam in the extraction workshop and pump into the boiler room for secondary use, effective utilize the waste heat, saving workshop production water.

 

Section 3: Crude Sunflower Oil Refining Workshop

---Flow Chart:

 

 

---Technology Description
1). Degumming Section
The solid impurities in crude sunflower oil will be removed by bag filter, and measured accurately by mass flowmeter, and then enter the degumming workshop to remove the colloidal, the crude palm oil heated will be ex-changed the heated, it will be fully mixed with phosphoric acid, the mixture will react in the acid tank. After the reaction, the alkali liquid will be added in, the partial neutralization reaction will be done here, and then the colloidal, starch and other impurities contains in oil will be separated out. ( Sunflower Oil Dewaxing Equipment )

All temperature in the whole degumming process is automatic control and adjustable, and all operations can completely achieve in control room. 


2). Decoloring Section  
The decoloring section adopt 50 tons/day device. The degummed oil will be pre-heated by the deodorization refined oil, then it will be heated and enter pre-mixing tank. Meanwhile, the clay which is measured by metering device directly in clay tank, and then the measured clay will be added to the pre-mixing tank. After a fully mixing, the mixture of clay and oil will be sent into the decoloring tower, the color will be removed here. The decolorization reaction in decoloring tower will last about 30-60 minutes.

 

Then the mixture will be pumped out and filtered by Armagh filter, the waste clay will be separated from the oil. The residue clay particle will be firstly filtered by the precision filter and then go into the gassing evolution tank to remove the moisture and volatile matter. The whole decolorization process temperature is self-control and adjustable. The filtration system has achieved the feeding oil automatically, circulation, filtration, baked cakes, slag and other operations by manual implementation .


3). Deodorization Section
Gas substances from The dcolored oil from the decolorization section will enter the deodorization section to remove the free fatty acids and unpleasant gas. All of this will be removed under the high vacuum circumsatnces by the deodorization tower. Using the to remove these substances by steam under high vacuum conditions. The removed fatty acid will be collected by the fatty acid trap and pumped into the receiving tank, this later will be used as vice products. ( Sunflower Oil Dewaxing Equipment )

 

4). Winterization Dewaxing Section
The deodorization oil gets into the crystallizing tank, the cooler will adjust the temperature to 50ºC, then in crystallizing tank the cooling water will cool the oil to 20ºC, after 72 hours crystallization, filter the oil to remove the wax.

 

The followings are the equipments of our company:

Main Projects Scope:
-----30-5000T/D oilseeds pretreatment project
-----30-5000T/D oilseeds extraction project
-----10-500T/D crude oil refining project
-----10-500T/D crude oil fractionation project
-----Oil interesterification project
-----Oilseeds protein, phospholipid project
-----Natural pigment extraction project
-----Grain deep processing project

Typical Project:
----30-1000T/D rice bran pretreatment, expanding, extraction project
----30-600T/D rice bran oil refining project
----150-1000T/D cottonseed dephenolizing protein
----10-1000T/D palm fruit oil pressing project
----10-500T/D Non acid method biodiesel production project
----10-2000T/D corn deep processing project

Newest Technology:
---Energy saving oil vacuum deodorization technology
---Concentrated protein extraction technology
---Mixed oil extraction technology
---Mixed oil refining technology
---Molecular distillation technology
---Broken rice desaccharification technology
---Continuous lignite extraction technology

 

Production Base of Huatai Company

Part Pictures of Delivery Site

 

 If u want to know more details about our factory and Sunflower Oil Dewaxing Equipment, please don't hesitate to contact me. All of our team members will try our best to help u build the most suitable plant. Waiting for you!!!

 

 
 

 

 

 

 

Large scale cereal and oil processing plant, line and equipment: 

  • Large scale oilseed pretreatment line; 
  • Large scale oilseed pressing line; 
  • Large and small scale oil extraction line and plant;
  • Large and small scale oil refining line;
  • Oil fractionation production line;
  • Large scale conveyor equipment project;
  • Corn/maize flour, grits, germ milling machines, corn processing lines;
  • Biodiesel technology; 
  • Cottonseed, rice bran and soybean protein technology; 
  • Palm Oil processing lines,etc.

Cereals and oil processing plant and equipment, turnkey project from a to z service, overseas installation service, training service, etc:

  • We provide EPC integral turnkey engineering services;
  • We provide grain and oil industrial plant design services;
  • We offer overseas installation services;
  • We provide overseas training services;
  • We provide pre-sales, after-sales service;  

Cereal and oilseed Material Solution and Equipment We Can Provide

 

Edible Oil Processing Equipment, Pretreatment Equipment, Extraction Machine, Refinery Machine etc:

Soybean, Palm Fruit, Coconut, Corn Germ, Rice Bran, Sunflower, Cotton Seed, Rapeseed, Peanut, Sesame, Castor, Pepper, Lemon, Grapeseed etc.

Biodiesel Oil Processing Equipment:

Animal fat, Waste vegetable oil, Seaweed & etc.

Essential Oil & Cosmetics oil Processing Equipment:

Avocado oil, Moringa oil, Almond oil & etc.

Cereals Milling Machinery Equipment:

Maize Milling Machine, Wheat Milling Machine, Soybean Milling Machine & etc.

Protein Treatment Machine/Engineering:

Cotton seed protein, Soy protein isolate/ concentrate & etc.

Animal Feed Machinery, including Feed Milling Machine, Feed mixer, Feed pellet machine and etc.:

Chicken Feed, Cattle feed, Goat & sheep feed, Pig feed, Aquafeed & etc.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier